Scania VCI3

Free Download Ford & Mazda IDS 116 for VCM2/VXDIAG VCX Nano

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3, HU66 Lock Pick and Decoder.

Hello to all.

This is the latest Ford & Mazda IDS software, version 116.

Enjoy!

Ford IDS 116 download:

This Webpage has Changed:

Please read the following steps carefully to install Ford Diagnostic Software

After Installing:

Diagnostic Software Updates will pop up on Mondays and Thursdays when available.

Mazda IDS 116 download:

https://mega.nz/#!AoxH1SaR!V5VBWJsvrrsLz3XT3yo0cGjcwotJBXjg1m1odw076Ik

Version: Mazda IDS 116.0, released 12/04/2019

Operating system:

You have to know:

1. IDS install:

Mazda IDS and Ford IDS cannot be installed on the same computer. You will need to uninstall one of them to use the other.

2. Vehicle compatible:

IDS software is only for 6th generation vehicles and earlier. MDARS is needed for 7th generation vehicles (see MDARS page for vehicles).

3. Device compatible:

• VCM II:

Mazda IDS software can only be used with Mazda VCM II, and Ford IDS software can be used with Ford VCM II only. VCM I is no longer supported.

• VXDIAG VCX Nano Ford/Mazda:

You should used links below:

Ford IDS V116

https://mega.nz/#F!fcoVnYZT!jpEjr4HHXU5Ifg8Hm0xERg

Mazda IDS V116

https://mega.nz/#F!bMg1ECzT!BjEMSq1TUvdgn2aT2CKTEg

Ford_Mazda IDS Patch (No need VMware)

https://mega.nz/#F!OV4RRC6B!seCWP6UCzOPWEDYlQxZ1iQ

Installation steps:

1. Install the official IDS diagnostic software and restart the computer after completion；
2. Install VCX client VX MANAGER, and install FORD type drive at the time point；
3. Connect to the Ford VCX device and click “Ford_IDS_FIx.exe”. After installation, you will be prompted to create shortcuts on the desktop.

Note:

1. In the future, when using VCX to diagnose Ford, we must click on “Ford_IDS_FIx.exe” to run the diagnostic software. Clicking on the original IDS is not diagnosable;
2. The diagnostic software must be installed first, and the device driver must be installed.

This article tech Supported by China OBD2,

Mercede Benz MB diagnostic tool reviews and comparison

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3, HU66 Lock Pick and Decoder.

This post is available with Mercede Benz diagnostic tools, include reviews and comparison of Benz VCI C6, Benz OEM C6, Benz ECOM, SD Connect C4, SD Connect C4 Plus Doip, Xentry Connect C5 Doip.

Comparison table:

Name	Benz VCI C6	Benz OEM C6	Benz ECOM	SD Connect C4	SD Connect C4 Plus Doip	Xentry Connect C5 Doip
Image
Feature	with dongle same look as the genuine c6		good at diagnosis and programming	good at diagnosis and programming	work with original Xentry XDOS DOIP Enabled	DOIP Enabled
Software compatibility	factory HDD/ SSD only	factory HDD/ SSD only	factory HDD/ SSD only	factory HDD/ SSD only/ original software	factory HDD/ SSD only/ original software	factory HDD/ SSD only
Update	By HDD/SSD	By HDD/SSD	By HDD/SSD	By HDD/SSD	By HDD/SSD	Free pdate by file
Diagnosis	Yes	Yes	Yes	Yes	Yes	Yes
SCN coding	Yes	Yes	Yes	Yes	Yes	Yes
Programming	Yes	Yes	Yes	Yes	Yes	Yes
Xentry	Yes	Yes	Yes	Yes	Yes	Yes
DAS	No	No	No	Yes DAS 07.2019	Yes DAS 07.2019	Yes
EPC	Yes	Yes	Yes	Yes	Yes	Yes
WIS	Yes	Yes	Yes	Yes	Yes	Yes
SDmedia	Yes	Yes	Yes	Yes	Yes	Yes
Star finder	Yes	Yes	Yes	Yes	Yes	Yes
PL73	Yes	Yes	Yes	Yes	Yes	Yes
DTS Monaco	Yes	Yes	Yes	Yes	Yes	No
Vediamo	Yes	Yes	Yes	Yes	Yes	Yes
DOIP	Yes	Yes	Yes	No	Yes	Yes
New Mercedes	Yes	Yes	Yes, year2011-	Yes	Yes, till year 2019	Yes
Old mercedes	No	No	No	Yes	Yes	No
Wifi	No	Yes	No	Yes	Yes	No

MB diagnostic tool reviews:

Benz VCI C6:

V2019.12 Benz VCI C6 OEM Xentry Mercedes Diagnostic Tool with Encrypted Dongle and Keygen, support new Mercedes Benz model and Doip protocol.

Mercedes Benz C6:

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Mercedes Benz eCOM:

Mercedes Benz eCOM DoIP Box Multiplexer Kit Support DoIP for latest E and S series, MB eCOM DoIP diagnostic C5 Xentry Perfect for Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5

Sd Conenct C4:

2019 New DOIP MB SD C4 Plus Mercedes Benz diagnostic tool is the only C4, support new Mercedes with doip, no battery need for firmware update. This Doip Benz Star C4 has better quality, wireless connection is stable, It’s waterproof, shockproof and tamper proof. Can work with original Mercedes Benz software.

SD Connect C4 Plus Doip:

Doip MB SD C4 Mercedes Benz Star Diagnosis Tool with Lenovo X220 Laptop,newest V2019.12 500GB Xentry Openshell XDOS software is pre-installed and activated, ready to use. Buy this bundle sales, not only help you save money, but also save time.

MB SD Connect C5 with DTS Monaco & Vediamo:

This article tech Supported by China OBD2,

Free Download Smart Switcher Xentry 12.2019 between SD Connect C4 & C3

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

Good to know: This is a full Switching between the two devices (C4) and (C3)

so that people can use only one laptop with the devices (C4) and (C3)

with this application you Switch Between devices by One Click Only and you will get fast switching .
you Never not need restart computer to active settings

Function Included with Switcher

Working for all version of “XENTRY” from first version to last version 12 2019:

https://www.chinaobd2.com/wholesale/v2019.12-mb-star-ssd.html

Full Backlist For (DAS) To working full with any Clone Device (C4) And (C3)

Full Backlist For (XENTRY) To working full with any Clone Device (C4) And (C3)

Update : 20/12/19
Working with new version 12 2019

Update : 01/10/19
Working with new version 05 and 07 and 09 2019

Update : 14/03/19
For those who use Windows and the library files are incomplete
The a kind of problem you can encounter

Software after run is automatically terminated
show message Don’t send

install New  Framework  

Code:

https://www.microsoft.com/en-us/download/details.aspx?id=56119

i put link download here in text file and when load it’s say attached is not allowed.
https://gofile.io/?c=tjOt4r

Version:

It’s is working with all version to Latest 03 2019

Activation:

https://cartechnology.co.uk/showthread.php?tid=47877

Post your software request to get activation ASAP.

Vehicle:

is from 2014 as no longer supported 

All vehicles loaded From DAS is working 100%
All vehicles loaded From Xentry is not working right now.

Why
because the New VCI is using some port that C3 before.
also there is a warning message about this “Not working” when Switching to C3

This article tech Supported by China OBD2,

VXDIAG VCX GM Fixed TPMS and Key FOB for 2008 Chevy Silverado 1500

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

Purpose:

I bought a used 2008 Chevy Silverado 1500 that ended up having a bad RCDLR (receiver) that controls the key FOB door locks and the TPMS (Tire Pressure System), which caused me to have the TPMS light on the dash and no working Key FOB. The dealer at first told me they couldn’t read the Body Control Module (BCM) or the RCDLR and that they would have to do diagnostics to figure out the problem, before they could determine the cause and replacement. All of that would of equaled hours of labor costs and $$$$. Searched around online and found this company selling these OBD2 programming modules for fractions of the cost of a dealer programming system and definitely cheaper than the hours of labor from the dealer.

Purpose:

I bought it off chinaobd2.com. 119usd spent

Tech2WIN install on Windows 7:
When I got it, it took a couple hours to figure out how to install the program correctly and learn the functions of the Tech2WIN program that comes with it. You have to follow the directions exactly on the VCXDIAG website on how to install the software and firmware. A tip is to use the CD of programs it comes with to install everything, rather than going to the website and getting the updated programs. I found that if you use the updated VX Manager program from the website, you will have a problem with TECH2WIN finding the VCXDiag NANO module to use. I installed this on a Windows 7 32Bit laptop that I have for just vehicle programming and diagnostics for all my vehicles. I have read that it works with Windows 10 64Bit, but I cannot speak on this. Once I got it working I could use the TECH2WIN program to read all the modules on my truck, even the BCM that the dealer could not read. I realized the RCDLR was bad and bought a new one, but it needed to be reprogrammed to the BCM.

Subscription required for reprogramming:
You cannot use the TECH2WIN software to reprogram, you have to go to AC Delco’s website and buy a 2 year programming subscription for one vehicle (VIN) for $40. There are YouTube videos that show you briefly how to program a module with their software. Make sure you use windows explorer and have the latest Java installed on your computer, as this is what the AC Delco SPS software uses to reprogram. You have to open the VX Manager software for your VCXDiag NANO and go under the diagnostics tab and install the “PASSTHRU” software/driver to use the AC Delco SPS programming software. This will allow you to see the VCXDiag NANO in the AC Delco SPS drop down list of programming modules labeled “VCX J2354” (or something labeled like that). When using and opening the AC Delco SPS software it will ask you to update the GM MDI software. I would advise against doing this, as when I did, I could not see the VCXDIAG GM module (i.e. VCXJ2354) and had to roll back the GM MDI software.

Reprogramming with AC Delco SPS sw:
When you go to reprogram a module you have to know the Software and Hardware information of the module to select the correct module configuration for programming. You can use TECH2WIN to read this information from the module before you attempt to reprogram it. Ensure you have the correct module version numbers selected before you reprogram or you will get an error in AC Delco SPS when programming. I made this mistake at first, but you just quit the program and cycle the key on and off in the ignition, and hypothetically no damage is done (at least in my case).

Conclusion:
All in all, the VCXDiag NANO, TECH2WIN, and AC Delco SPS software worked for me and reprogrammed the RCDLR to my BCM, which fixed the TPMS and Key FOB to work again. Note that my vehicle uses the TECH2WIN software for communication to my truck, and newer GM vehicles may use the GSDS programming software. I did not used the GSDS program/software, so I cannot speak on how to use it or install it properly, but it did come with the VCXDiag NANO on the CD.

NOTE:

You will have to be a little computer savvy to get these various programs and VCXDiag Nano to work correctly. So if you are not, either do your homework ahead of time (i.e. Forums, YouTube, Websites), or do not attempt it and find someone else how can, or pay dealer pricing.
In my opinion, this is a good product that does what it says it can, and more than worth the money and time to complete diagnostics or programming yourself; rather than going to the dealer and pay out the rear.

This article tech Supported by China OBD2,

Free download JLR SDD V159: Mongoose, DoiP VCI, VCMII etc works

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

Free download JLR sdd v159 software to work with Mongoose PRO, VCMII, JLR DoiP VCI etc.

Step 1: free download SDD V159:

http://diagnosticdelivery.jlrext.com/idscentral

Step 2: free download SDD V159 driver:

https://mega.nz/#!oAo3iIJZ!1cBjn9hw4PrL_DIcnL1qDnAu8fP1hakkohoXEpi375Q

Step 3: free download SDD V159 patch:

https://mega.nz/#!5JIlBKrK!6mReuVJT14LQIETKG6fcbfUAEyI82TKjsfQqfXg49W4

System requirements:

OS: Windows XP Pro SP3 32Bit , Windows 7 32 bit (Recommend Windows 7 32bit)

CPU: 2.5 GHz or greater (Or Higher)

RAM: 4GB

HARD DRIVE: 320GB Free Disc Space Minimum

Supported Hardware

Mongoose PRO

JLR HV I (not officially supported anymore but still working)

VCM II both original and clone

Da-Dongle J2534 VCI (replaced VCM I)

JLR VCI (Jaguar Land Rover approved SAE j2534 Pass-Thru interface)

JLR VCI (SP284)

JLR DoiP VCI

Which JLR Mangoose Pro cable is the best?

Here you can go:

SRC: https://www.chinaobd2.com/wholesale/best-jlr-mangoose-sdd-pro.html

It is much better than JLR Mangoose cable (sp116)

Why it is the best JLR Mangoose cable?    

1. 1:1 clone
2. Compatible with PWM protocol (old Jaguar & Land Rover)
3. Compatible with CAN1 and CAN2
4. Compatible with K-line and L-line
5. Can program power supply 13-14V
6. All functions are fully checked out of the factory to ensure the consistency of the product before delivery.

Language available: German, English, Spanish, French, Italian, Dutch, Portuguese, Russian, Japanese, Chinese, Korean

Vehicle Coverage: 2006 – 2017 Jaguar & Land rover

For Land Rover: L316, L319, L320, L322, L359, L538 etc

For Jaguar: X100, X150, X202, X250, X350, X351, X400 etc

SDD V159 diagnosis and programming functions:

1. Data Lists
   2. Active Tests
   3. Monitor
   4. Utility tests
   5. Reprogramming ( Immobilizer programming and ECU programming require to do it online, that needs you have Jaguar account. Other programming no need to do online, but you need connect voltage stabilizer to make sure your voltage is stable )
   6. Diagnostics Trouble Codes

Enjoy.

This article tech Supported by China OBD2,

Yanhua ACDP:BMW CAS4 FEM BDC Mileage Reset Without Dismantling

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

This article is available with Yanhua mini acdp done BMW CAS4 / BMW FEM BDC mileage reset without dismantling.

Part 1: BMW CAS4 mileage programming via OBD using Yanhua mini acdp

Tools to use:

Yanhua ACDP main unit + CAS4 module 1

M35xx eeprom adapter

Plug Mini ACDP into the BMW 16pin port.

Guide in two steps:

Step 1: CAS4 box mileage reset

Step 2: Dashboard mileage modification (required)

***The above two parts are necessary, if you only done CAS4 box mileage reset and not Dashboard mileage modification, the mileage value will restore to the old when you start the car.

In details…

Step 1: CAS4 box mileage reset

On the Mini ACDP app home menu, choose “BMW”.

CAS1-4

CAS4 /CAS4+

OBD mode.

IMMO / Mileage.

Reset Mileage.

Next, please follow the Mini ACDP on-screen prompts to finish.

Step 2: Dashboard mileage modification (required)

Simple guide: Dismantle the BMW dashboard from the car, remove the M35XX chip to read the old mileage value, then write new value.

In the Mini ACDP software, choose “M35XX”.

Have the following dashboard chip types:

M35080

M35080 V6 / VP

080DOWQ

080DOWT

160DOWQ

160DOWT

M35128

Have the following function menu:

Backup data

Recover data

Modify mileage

Open HEX Editor

To reset the mileage on the newest BMW with 35160WT dashboard, it requires one extra Simulator.

How to: YH35XXProgrammer+Simulator Instruction

Part 2: Yanhua acdp BMW FEM BDC mileage reset on Bench

Tools to use:

Yanhua mini acdp

FEM/BDC Module Adapter + authorization (module2)

M35xx eeprom adapter

Mileage reset way: on Bench without dismantling

Guide in two steps:

Step 1: FEM / BDC box mileage reset

Step 2: Dashboard mileage modification (required)

***The above two parts are necessary, if you only done FEM / BDC box mileage reset and not Dashboard mileage modification, the mileage value will restore to the old when you start the car.

Step 1: FEM / BDC box mileage reset

1). Hardware connection

FEM/BDC is located at the lower part of the A column at the front passenger side.

FEM diagram

BDC diagram.

2). Software menu selection

Click on “BMW”.

FEM /BDC.

IMMO / Mileage.

Reset mileage.

Part 2: Dashboard mileage modification (required)

Simple guide: Dismantle the BMW dashboard, remove the M35XX chip to read the old mileage value, then write new value.

Click on “M35XX”.

Have the following dashboard chip types:

M35080

M35080 V6 / VP

080DOWQ

080DOWT

160DOWQ

160DOWT

M35128

Have the following function menu:

Backup data

Recover data

Modify mileage

Open HEX Editor

To reset the mileage on the newest BMW with 35160WT dashboard, it requires one extra Simulator.

How to: YH35XXProgrammer+Simulator rInstruction

Enjoy!

This article tech Supported by China OBD2,

How to solve VXDIAG GM GDS2 “No Valid Lease Found”?

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

I have one vxdiag vcx nano gm cable and when running GDS2 software, I get error “no valid lease found” .

I tried to reset the computer date to China date, uninstall anti-virus program, reinstall GDS2 software, all the same results.

Possible reason and solution:

You may start GDS2 software from VX Manager, please run GDS2 from patch directly.

Watch video: 02.2019 GDS2 Software win7 installation for VXDIAG Nano



GM GDS2 V20.3.05100 win7 installation guide:

Step 1: Auto install GDS2 2019_02

run GDS2AutoInstall.exe to install GDS2 2019_02

Step 2: install Vxmanager 1.5.0.0428

Run “VX Manager”.

Step 3: install GDS2/Tech2win driver

Plug VXDIAG GM to install GDS2/Tech2win driver.

Click on “VX Manager” -> Install -> Install complete VCX PDU Driver (GM MDI) 1.0.9.190428.

Step 4: run GDS2 to diagnose Buick Excelle 2010

Run GDS2 and choose a language: English

GDS 2 expiration: 9729 days

GDS 2 version 20.3.05100

Choose MDI2, connect MDI2.

Read VIN -> choose model year-> Buick -Excelle.

GDS2 test on Buick Excelle 2010 : module diagnosis -> body control module -> headlamp: halogen (T4A TT4) -> body style: hatch back

diagnostic trouble code – chassis control data – body control module

Job is done.

www.chinaobd2.com

This article tech Supported by China OBD2,

OBDSTAR X300 DP/PRO3 Can Do Toyota G H Chip All Keys Lost

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3, HU66 Lock Pick and Decoder.

New update OBDSTAR X300 Pro3 and OBDSTAR X300DP now can do Toyota G chip and H chip all keys lost now. Attach some test video and update guide.

Toyota G chip all key lost video:

OBDSTAR X300 DP PAD Do Toyota RAV4 with G ALL Key Lost programming：

Toyota H chip all keys lost test reports with Video:

Now, to update your OBDSTAR X300 Pro3 and OBDSTAR X300DP

Tip: OBDSTAR X300 DP update is easier than X300 Pro3.

Part 1: How to update obdstar X300 DP?

Attach a PDF file: http://www.eobdtool.co.uk/upload/pro/obdstar-x300-dp-pad-tablet-update-manual.pdf

Part 2: How to update obdstar X300 Pro3?

Step 1:

1. Remove the TF card from your device.
2. Insert your TF card into computer.
3. Format your TF card and ensure it is empty.

Step 2:

Login our website: http://member.obdstar.com/MemberEn/Register.html and click “A Key upgrade”

Step 3:

Download and install the “One Key upgrade”. You will see this software.

Step 4:

Open the “one key upgrade”. Input your username and password. Then select “End User” and click “Log in”.

Step 5:

Input your S/N.

Step 6:

Select all and click “Upgrade”.

Step 7:

Upgrade completed.

Step 8:

Open your TF card. You will see these files.

Step 9:

Remove the TF card from the computer. Insert your TF card into the device.

OBDSTAR X300 Pro3 and OBDSTAR X300DP update succeeds!

You could program Toyota G chip and H chip (American type and Middle East) ALL Keys Lost.

This article tech Supported by China OBD2,

GM Tech 2 scan tool self test

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3, HU66 Lock Pick and Decoder.

Tech 2 scan tool self test… here you go.

How to do Tech 2 self test:

Insert GM card into the card slot on Tech 2

Insert the self test adapter with the Tech2 main unit

Power on Tech2 scan tool

Go to the menu, and choose “F4 tool options”

Go for F3 self test

Follow the system prompts:
Before running the Tech 2 self test:
CANdi interface must not be connected
ALDL loopback should be connected
Failure to follow these instructions may invalidate the self test
Press EXIT to continue

Go to self test

Self test 1: Automated VCI

Self test: Tech 2 VCI

Mux…pass

Adc…pass

Sipo 8…pass

Sipo 20…pass

Dlc 1…pass

Dlc 2…pass

Tpu…pass

Hbcc…ignored

Ccd…pass

Dual uart…pass

J1708…pass

Gnd fet…pass

Level shifters…pass

Cross point…pass

Short L and M…pass

Test I/01-I/016…pass

Loopback…pass

Self test 2: CANdi interface

Two options for CANdi: POST results and self test

First, CANdi POST test

CANdi present: pass

CANdi ram: pass

CANdi boot: pass

Uart data link: pass

Second, CANdi self test

CANdi present: pass

CANdi ram: pass

CANdi boot: pass

CANdi resident: pass

CANdi application: pass

Low speed data link: pass

Med. Spd. Data link: pass

High speed data linl: pass

Self test 3: Tech 2 Key pad

F0 key: pass

The test from

F0-F1-F2-F3-F4-F5-F6-F7-F8-F9-EXIT-ENTER- ？

All buttons are tested one by one.

Self test 4: RS232 cable

Select F3: Selectable main PCB

Select F2:RS232 LoopBack

Tech2 RS232 cable: pass

All passed!

This article tech Supported by China OBD2,

OBDSTAR Support Better Coverage than OBDSTAR F100

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3, HU66 Lock Pick and Decoder.

OBDSTAR H100 Key Programmer is regarded as the next generation of OBDSTAR F100.

OBDSTAR H100 Ford Mazda key tool can perform immobilizer function and mileage correction function on the newest Ford Mazda up to 2018 year e.g FORD Pin code Free Matching  for New Mondeo/Edge/Taurus/Mustang/F150 2015- Models: Edge 2016+, F150 2015, Galaxy 2015+, Mondeo 2015+, Mustang 2015+ and Ranger 2016+, etc.

Here OBDSTAR H100 whole package: a high quality of main unit with display screen, one OBD main cable, one user manual and one TF card reader (used to update online). And the whole package only weights 0.22LB which is much easier to take.

OBDSTAR H100 Ford Mazda Landrover Jaguar coverage:

OBDSTAR H100 Ford Immo function list

OBDSTAR H100 Mazda Immo function list

OBDSTAR H100 Landrover Immo function list

OBDSTAR H100 Jaguar Immo function list

OBDSTAR H100 Ford mileage function list

OBDSTAR H100 Jaguar/Mazda/LandRover mileage function list

OBDSTAR H100 language available: English

OBDSTAR H100 update:

Click on OBDSTAR official site: http://en.obdstar.com/

OBDSTAR H100 Warranty: one-year warranty

OBDSTAR H100 for sale:

More expensive than OBDSTAR F100 because of its better coverage and new hardware chip.

https://www.chinaobd2.com/wholesale/obdstar-h100-ford-mazda-key-programmer.html

This article tech Supported by China OBD2,