Scania VCI3

Scania VCI3 is a brand new tool designed by Scania to provide full maintenance for all Scania trucks, buses and other heavy vehicles or heavy duty engines made by Scania.
chinaobd2 by chinaobd2 @

Lonsdor K518 & L-JCD Path Cord Program Key for Dodge Journey 2018-

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

This instruction show you guide on how to use Lonsdor K518 and Lonsdor L-JCD cable to program key for Dodge Journey 2018-.

Function

1.Add key: program and add one key.

2.Delete key: delete the programmed keys.

3.Read PIN code: read car’s PIN code.

Operation

Program process:

Add key or all key lost: read PIN code-> add key.

Delete key: read PIN code-> delete key.

Tips:

1.4-Bit of PIN is required when adding/deleting keys.

2.Click blue texts to view more operation process.

3.Enable to program smart key of Journey(2018-), you need to use a Lonsdor L-JCD patch cord to connect K518 with car before program.

Add smart key

1.Turn ignition off, turn on the HAZARD lights.

2.Input 4-bit PIN code.

3.In 30s put the smart key(to be programmed) close to car start button, and press the unlock button once.

4.Program completed.

Delete smart key

1.This function will delete all the registered keys.

2.Input 4-bit PIN code.

3.Configuring… deleting completed.

Read PIN code

1.Start to read PIN code.

2.Trying yo read PIN…

3.PIN reading completed.

*Please note: this device supports [program smart key] for Journey(2018-), you need to use a L-JCD patch chord to connect K518 with car OBD before program.

1.Find the wiring position at the bottom left under steering wheel.

Lonsdor-K518-L-JCD-Path-Cord-Program-Key-for-Dodge-Journey-1

2.Connect a L-JCD patch chord in the wiring position as shown below.

Lonsdor-K518-L-JCD-Path-Cord-Program-Key-for-Dodge-Journey-2

3.Then use the L-JCD patch chord to connect car OBD with K518’s OBD port.

Lonsdor-K518-L-JCD-Path-Cord-Program-Key-for-Dodge-Journey-3

Attention

Delete key: this function will delete all the registered keys.

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

How to do Volvo DiCE Configuration in VIDA software

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

To test VOLVO DiCE communication with VIDA follow this procedure:

To test VOLVO DiCE communication with VIDA follow this procedure:

1.Connect the DiCE unit by USB cable to your computer.

2.Start VIDA.

3.Open the Connected Vehicles tab.

4.Select the DiCE to be tested in the drop-down menu.

The DiCE Configuration button appears.

volvo-dice-configuration

5.Click DiCE Configuration.

6.Click Test Communication Tool to start the test of the USB connection.

7.Select the communications to be tested by ticking the check boxes. By default, if no check boxes are ticked, the first eight elements are tested.

8.Click Run to start the test.

OK should be displayed to the right for every row.

9.Click Close in the Test communication tool window.

Do not close the Test/Remove DiCE window.

10.Remove the USB cable from the DiCE unit.

volvo-dice-usb

The DiCE will now communicate via Bluetooth.

11.If you are using a computer with a built-in Bluetooth receiver, this receiver has to be disabled in order for the Bluetooth adapter to connect properly to your computer.

12.Press [WIN] + [R] on your keyboard.

The Device Manager opens.

13.Type devmgmt.msc and press [ENTER] .

At this point, a User Account Control pop-up window might open. In that case, click Yes.

14.Double click Bluetooth Radios.

15.Right click all devices listed under Bluetooth Radios and select Disable.

The built-in Bluetooth receiver(s) are disabled.

16.Connect the Bluetooth adapter to a free USB port on the computer.

17.In VIDA, click Test Communication Tool to start testing the Bluetooth connection.

18.Select which the communications to be tested by ticking the check boxes. By default, if no check boxes are ticked, the first eight elements are tested.

19.Click Run to start the test.

OK should be displayed to the right of every row.

20.Click Close in the Test communication tool window.

21.Click Close in the DiCE Configuration window.

Close the DiCE Configuration window by clicking Close.

The DiCE unit is now configured for both USB and Bluetooth connection at the VIDA client. If DiCE is connected with a USB cable, the communication will always go through the cable.

And if you need newest version Volvo vida dice software 2015A,check here:

VIDA 2015A download and install for diagnosing Volvo 1999-2017

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

How to Personalize TIS Techstream v13.30.18 Menus?

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

This is my first Toyota and the first time I ever really went into any of the vehicle settings through the OBD2 port. It was a frustrating experience to say the least. Getting the Mini VCI J2534 cable and the Techstream software v13.30.18 to work on my system was a challenge. First off I’m running Windows 10 thus 64 bit OS has compatibility issues with the MVCI cable despite having Windows 10 recognize the devices. I had to surf the net for several step-by-step guides

(https://youtu.be/1dusP2EWe9I) to get it to work. When the video was 1 year ago using V13.00.022 software I had my doubts but ultimately it worked.

Online guides mention you need to use the drivers from the CD that came with the cable. Ok so my laptop doesn’t have CD drive, great…. I dug up an old laptop. Tried to get it to boot and work and when I finally did, I found out the CD was literally a blank CD (at least I can use it to write data into). Then came the issue with Techstream and all the different versions available. Some are free, others say it’s free, some come with bonus trojan’s yet others require the activation code which you can get by joining a forum for $20. Scam… Anyway, I got my VCI cable from chinaobd2.com which can be easily crack without activation code. Finally installed v13.30.18 for the n’th time after finally configuring it to work with Windows 10 and bam woohoo! I was so happy until I realize I couldn’t get into any of the customization settings. No idea why. Internet says it’s the software so back to square one. Install v14 but ultimately I couldn’t even get it to load. So I reinstalled v13.30.18 and for whatever reason, the missing customization buttons suddenly appeared. It works! I hope I never have to format my computer ever to try to get this to work again. What a PITA.

So rather than reinventing the wheel here are the forum sites I used with very helpful individuals sharing their drivers and files

https://www.ft86club.com/forums/showthread.php?t=73034

https://www.toyota-4runner.org/general-discussions/150824-solution-mini-vci-toyota-tis-techstream-8-x-windows-7-8-64-bit.html

https://www.tundratalk.net/forums/tundra-general-discussion/109367-techstream-software-cable-35-a-2.html

http://blog.chinaobd2.com/toyota-tis-techstream-13-30-018-13-00-022-download-and-win7-setup/

With Techtream Mini VCI J2534 cable running Techstream software v13.30.18, All I wanted to change was the loudness of the turn signal.. a couple hours of work for a not very significant volume difference. Oh well. See attachments for all the configuration settings available as well as its default for a 2019 Canadian RAV4 Hybrid Limited.

1customization.menu-01 2air.conditioner-02 3clearance.warning-03

4display-04

5door.lock-05

6illuminated.entry-06

7other-07

8power.window-08

9psd.pbd_.operation.1-09

10seat-10

11security-11

12smart.key.access-12 13warning-13 14wiper-14 15

Enjoy!

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

2015-2017 Mercedes FBS4 Mileage Programming Solutions Cheap & Expensive

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

2015-2017 Mercedes FBS4 mileage programming solutions:

1.Mercedes_OBD assistant cable (Newest, 269usd)

2.CG MB programmer newest version (adds Mercedes FBS4 mileage programming functions)

Part 1: Mercedes_OBD assistant cable

01-mercedes-obd-mileage-programming

Price: 269usd

Method: via OBD

 

Car model list:

W222: 2015 -2017

W205: 2015-2017

C217: 2015-2017

C190: 2015-2017

C253: 2015-2017

X253: 2015-2017

W447: 2015-2017

W213: 2015-2017 (will update)

-2015: need can filter

Type 1: MB CAN Filter 18 in 1 for Benz BMW (20usd)

https://www.chinaobd2.com/wholesale/yanhua-mb-can-filter-18-in-1-benz-bmw-universal-filter.html

02-can-filter-for-benz

Type 2: CAN Filter 18 in 1 for Benz/BMW (20usd)

https://www.chinaobd2.com/wholesale/can-filter-18-in-1-for-benz-bmw.html

03-can-filter-for-benz

Procedure:
1. First use the <1 OBD Read Config Info> option to get the vehicle configuration information;
2. Reinstall the meter and write the vehicle configuration information with the <3 OBD Write Config Info> option;
3. Finally use the <4 OBD Read Mileage> and <5 OBD Write Mileage> options to read and write the kilometers.
4. Modifying the kilometers again is only required to operate in <4 OBD Read Mileage> or <5 OBD Write Mileage> steps!!!
04-mercedes-obd-mileage-programming

Note:
<1 OBD Read Config Info> and <2 OBD Write Config Info> communication takes 15-30 minutes, Please make sure the vehicle battery is sufficient! Before operating <2 MCU Data Programming>, Please confirm whether the meter is 8-drive or 11-drive.

Step 1: OBD Read Configuration Information;
If Odometer Correction is supported, here are the tips: Make sure the vehicle battery is sufficient.
If Odometer Correction is not supported, here are the tips: For cars before 15 years, you need to add a filter, and then you can operate steps 4(OBD read kilometers) and steps 5(OBD write kilometers); cars after 17 years do not support Odometer Correction temporarily.

An example: Benz 205 chassis instrument for 16 years calibration process

Step 1: OBD Read Configuration Information
Configuration data must be saved after successful reading!

Step 2: MCU Data Programming
At this time, you need to remove the back cover of the dashboard, select the type, and select the wiring method according to the type. You can open the wiring diagram directly,there are 5 wires in total(as the picture). The meter is divided into 8-drive and 11 drive.Please confirm whether the meter is 8-drive or 11-drive.
05-mercedes-obd-mileage-programming

After connecting the wires according to the wiring diagram, perform the operation. If the MCU data is edited successfully, the wiring can be removed.

Step 3: OBD Write Configuration Information
The configuration information is the data read in the first step, and you can select the saved data at this time;
Then you can get the prompt that the vehicle configuration information is written successfully

Step 4: Adjust the mileage
Use the <4 OBD Read Mileage> and <5 OBD Write Mileage> options to read and write the kilometers.
For example, we wrote the mileage of 12345; then read it out is 12345km.

Look at the dashboard again, the kilometers are correct! The steps are complete!

Part 2: Update! CGDI MB adds FBS4 mileage programming via OBD

Nice features:

  1. via OBD
  2. Without can filter
  3. Safe and stable
  4. Without dismantling

Supported car models:

W205   2015-2017

W222   2015-2017

C190    2015-2017

C217    2015-2017

C253    2015-2017

X253    2015-2017

W447   2015-2017

06-cgdi-mb-fbs4-mileage-programming-via-obd

 

Obviously, if you don’t have CGDI MB programmer, the cheapest FBS4 mileage programming solution is Mercedes_OBD assistant cable.

Enjoy!

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

How to Delete App in Autel MaxiSys Diagnostics

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

If you are having space issues with your Autel MaxiSys tool and you need to make some more room, this video will show you how to delete vehicles that you are not going to see or use. If you need to retrieve them you can do so with an active update subscription.

WARNING! If you delete these vehicles from your tool and you are not under update contract you will lose them.

Go to Autel diagnostics software and uninstall application

delete-autel-maxisys-app-1 delete-autel-maxisys-app-2 delete-autel-maxisys-app-3 delete-autel-maxisys-app-4 delete-autel-maxisys-app-5 delete-autel-maxisys-app-6 delete-autel-maxisys-app-7 delete-autel-maxisys-app-8

Go to ES File Explorer and delete files for vehicle diagnostics

delete-autel-maxisys-app-9 delete-autel-maxisys-app-10 delete-autel-maxisys-app-11 delete-autel-maxisys-app-12 delete-autel-maxisys-app-13 delete-autel-maxisys-app-14 delete-autel-maxisys-app-15 delete-autel-maxisys-app-16 delete-autel-maxisys-app-17 delete-autel-maxisys-app-18 delete-autel-maxisys-app-19 delete-autel-maxisys-app-20 delete-autel-maxisys-app-21 delete-autel-maxisys-app-22

Then you’ll see that the app deleted is displayed with an arrow used for download.

That is, the app has been deleted and you need download it again if you need it

delete-autel-maxisys-app-22 delete-autel-maxisys-app-23 delete-autel-maxisys-app-24 delete-autel-maxisys-app-25 delete-autel-maxisys-app-26 delete-autel-maxisys-app-27

Autel tech support from chinaobd2.com

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

VXDIAG VCX SE Pathfinder: How to Enable SDD Cccess to TOPIx Services?

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

Question:

How does VXDIAG VCX SE DoIP Pathfinder JLR SDD work? Does the user need to register one member on the Landrover website? Does it need the password of the data patch?

vxdiag-vcx-se-pathfinder-patch-01 vxdiag-vcx-se-pathfinder-patch-02 vxdiag-vcx-se-pathfinder-patch-03

Vxdiag chief engineer replied:

Put the downloaded installation file into the JLR folder, and confirm that the file is complete

Modify the configuration options under Name in the Install.ini file, and replace the file names with the file names of the current version in order, paying attention to the order

After the preparation is completed, open the installation script and click Run to install it automatically.

After the installation is complete, you need to download the PATH offline.

 

Free download SDD patch:

https://mega.nz/#!BYxnUIQL!B8RGcrbioqk6OgCufPy3zH1v_Mie6hZkEaHan4kZKrs

Compatible with only VXDIAG VCX SE For JLR SDD and Pathfinder Software

Good luck.

www.chinaobd2.com

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

Which is the Latest Xentry Diagnosis Open Shell with HHT Built-in

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

Need advice: I plan to put a Windows 7 32 bit system on a partition and run an older version of Xentry that will auto-switch to DAS and HHT when I work on the older cars.

Please tell me which version of Xentry will run on a Windows 7 32 bit system and will give me automatic switching to HHT when I need it.

MB SD Connect Compact 4

The adavice:

None of the XDOS/OpenShell versions include HHT. The last release to include HHT was not XDOS/OpenShell, but was Star Diagnosis 12/2015 which would only install on Windows XP Professional.

You can get the HHT files and install them on any x86 OS and XDOS can open HHT if the HHT files come with an installer that places the correct files in place to link HHT to XDOS.

The latest HHT-WIN version: 12.2019

The ability is:

HHT-WIN should be able to read all Modules.

Having said that, for Model Years 1990 – 12/1993, the Roadster Soft Top Module has 30 possible fault codes associated with it.
Whereas for Model Years 1/1994 – 1996, the Roadster Soft Top Module has only 11 possible fault codes associated with it.

The installation:

HHTWIN directly install on Windows 7 32 bit:

Disable UAC settings to “Never notify” -> Restart system if needed. It`s better to DISABLE idiotic Windows Defender too. Then, you could return UAC settings back.

First simply run HHT.exe, it will install HHT to C:\HHT, then start Xentry.OpenShell.XDOS.HHT.C4.exe/Xentry.OpenShell.XDOS.HHT.C3.exe … that`s all.
Some systems must be restarted at the end.

The problem with “–” version was fixed.
Delete C:\HHT directory and begin from the first step.
If you will update your Xentry.OpenShell.XDOS version … just apply the patch once again.

The good to use HTT-WIN:

1: so far the SD Connect C4 & HHT has been informative. erased RST codes, top works, going through other functions found some neat ones. Turn on/off headlights, taillights, turn the electric fans onto each of the 4 speeds etc.

2: On my new 2015 GMC Denali pickup, from the dash menu I can change between F and C for outside temp and coolant temp and transmission temp, and between MPH and KPH on the spedo, and between PSI and BAR on the oil pressure. I think I can also change the tire pressure readout between PSI and either BAR or KPascals. And I can even change the shape and location of the various gauges. Spedo and tach stay in the same place, but can change shape and display for oil pressure, transmission temp, voltmeter, coolant temp.

3: I changed F to C with HHTwin. I also activated the rollbar. Kind of underwhelming.

4: HHT-WIN successfully read the RST (RV) Module for my 1995 SL500.

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

How to Get System Log from Lonsdor K518 Programmer

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

This instruction share by Lonsdor K518 tech team,it focus on how to get system log from Lonsdor K518 device.

Procedures:

Hold those two buttons marked in red at the same time.

How to Get System Log from Lonsdor K518 Programmer (1)

Then you will enter the interface below,click “System Information” once and you will enter the interface as shown below.

How to Get System Log from Lonsdor K518 Programmer (2)

Click the area marked in red for five to eight times in one second continuously and quickly. And then click the area marked in green once.

How to Get System Log from Lonsdor K518 Programmer (3)

You will enter the interface below once again.

How to Get System Log from Lonsdor K518 Programmer (4)

Hold K518 return key of the device for several seconds.

How to Get System Log from Lonsdor K518 Programmer (5)

You will enter the interface as shown below. Click “Get System Log” once and then click “SD Card Scan” once.

How to Get System Log from Lonsdor K518 Programmer (6)

After that, connect the device to a computer and you will find a file called “System Log”.

How to Get System Log from Lonsdor K518 Programmer (7)

More info about Lonsdor K518 please refer to:

https://www.chinaobd2.com/wholesale/lonsdor-k518ise-key-programmer.html

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

XTOOL A80 Mileage Adjustment for KIA Sportage

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

Here is customer feedback on how to use XTOOL A80 to do mileage adjustment for KIA Sportage.It is very easy to perform,just by OBD.

XTOOL A80 Mileage Adjustment for KIA Sportage (1)

Connect XTOOL A80 full system to KIA port,then enter “Diagnosis”

XTOOL A80 Mileage Adjustment for KIA Sportage (2)

Select “Odometer adjustment”

XTOOL A80 Mileage Adjustment for KIA Sportage (3)

Select “KIA”–>>”Sportage”–>>”D70F3536″–>>”Mile”

XTOOL A80 Mileage Adjustment for KIA Sportage (4) XTOOL A80 Mileage Adjustment for KIA Sportage (5) XTOOL A80 Mileage Adjustment for KIA Sportage (6) XTOOL A80 Mileage Adjustment for KIA Sportage (7)

Please input the file name you to save it.The file is saved the original vehicle data,not to be overwritten.Here we can input a new file name as Kia 4,then press “Done”,and click “OK” to continue.

XTOOL A80 Mileage Adjustment for KIA Sportage (8)

Now it will show you with the current mileage value “22651”

XTOOL A80 Mileage Adjustment for KIA Sportage (9)

Press the “Change Mileage” button at right low corner to open the new mile value input window

Here input 11000 and click “OK”

XTOOL A80 Mileage Adjustment for KIA Sportage (10)

Adjustment complete

XTOOL A80 Mileage Adjustment for KIA Sportage (11)

Check the value on the dashboard “10999” miles

XTOOL A80 Mileage Adjustment for KIA Sportage (12)

More detail information,please check here:

https://www.chinaobd2.com/wholesale/xtool-a80-h6-full-system-diagnostic-tool.html

This article tech Supported by China OBD2,

chinaobd2 by chinaobd2 @

How to Upgrade TMPro to the New Version TMPro 2 Interface

Chinaobd2 is a leading supplier of all kinds of Car Diagnostic Tool, Truck Diagnostic Tool, OBD2 Code Reader, Car Key Programmer,ECU Chip Tunning,etc. Currently, the top selling product including: VCDS VAG COM Cable, iProg+ Programmer, Scania VCI3

chinaobd2

This is a instruction on how to upgrade your TMPro with the new and improved TMPro 2 insterface.

Preparations:

Soldering tool

Screwdrivers

TMPro upgrade kit

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-1

Steps:

First remove the 2 body holder screws.You can locate them on the back of the TMPro

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-2

Remove the connector port.No tools needed just use your hand and remove the port as shown

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-3 How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-4 How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-5

Remove the bottom cover.Do not use too much force.Be carefull not to damage the wire connector inside.

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-6

Be carefull not to damage the wire.Do not use tool much force while dissasembling.

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-7

Use the soldering iron to desolder the wire connector

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-8

Separate the PCB from the loard.Remove the screws using a screwdriver

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-9 How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-10

Disassemble your new TMPro interface into 3 components.

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-11

Attach the PCB to the board using a screwdriver

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-12

Place the connector into its socket and fix it with the nut

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-13 How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-14

Place the bottom cover and use a screwdriver to fix it in position

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-15

Now,use soldering iron to solder the coil with the wire connector

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-16

Position the coil into the socket and press down with your hand until it is fixed into place.

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-17 How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-18

Now you can use your TMPro with the new and improved interface.

How-to-Upgrade-TMPro-to-the-New-Version-TMPro-2-19

More TMPro 2 programmer,check here:

https://www.chinaobd2.com/wholesale/tmpro-2-original-transponder-key-programmer.html

This article tech Supported by China OBD2,

1234 ... 68
New Post
feeds Feeds
chinaobd2 solarairconditioner